Get an Epic Experience with Premium

Omen Threat Meter

Boss Encounters Login to Add Favorites
  • 106 Likes
  • World of Warcraft
  • 278,417 Monthly Downloads
  • Supports: 6.0.2
  • 18,083,101 Total Downloads
  • Updated 10/17/2014
  • Created 09/09/2007
  • 29,778 Favorites
  • Project Site
  • Comments
  • Release Type: Release
  • License: All Rights Reserved
  • Newest File: v3.1.9
or
Support development! **
Donate

About Omen Threat Meter

Omen

https://www.paypal.com/en_US/i/btn/x-click-but21.gif

Omen is a threat meter.

Basically, enemies in WoW decide who to attack by deciding who is the most threatening based on the abilities you use. What Omen does is provide accurate values of your group's relative threat level on individual enemies, so that you can see when you're in danger of pulling aggro (or, if you're next on the snack list if your tank bites it). This info is usually only critical in raids, where only tanks can survive aggro, but it's useful for any multi-player situation.

Changes from version v3.1.6 to v3.1.7

  • Add option to choose what sound channel to play warnings on, default is SFX (thanks tharai).
  • Add fixes for MoP patch 5.0.4 (thanks dridzt).
  • Removed compatibility code for older versions of WoW. This version now only runs in MoP.

FAQ

How is Omen3 different from Omen2?

Omen3 relies completely on the Blizzard threat API and threat events. It does not attempt to calculate or extrapolate threat unlike Omen2 except when Tricks, Misdirection, Mirror Image, Fade and glyphed Hand of Salvation are active.

Omen2 used what we called the Threat-2.0 library. This library was responsible for monitoring the combat log, spellcasting, buffs, debuffs, stances, talents and gear modifiers for calculating each individuals threat. Threat was calculated based on what was known or approximated from observed behaviors. Many abilities such as knockbacks were just assumed (to be a 50% threat reduction) as they were mostly impossible to confirm.

The Threat-2.0 library also included addon communication to broadcast your threat to the rest of the raid as long as they were also using Threat-2.0. This data was then used to provide a raid wide display of threat information.

Since patch 3.0.2, Omen no longer does any of these things and the need for a threat library is no longer necessary. Omen3 uses Blizzard's new in-built threat monitor to obtain exact values of every members threat. This means Omen3 has no need for synchronisation of data, combat log parsing or guessing, resulting in a significant increase in performance with regards to network traffic, CPU time and memory used. The implementation of boss modules for specific threat events (such as Nightbane wiping threat on landing) are also no longer necessary.

Further benefits of this new implementation include the addition of NPC threat on a mob (eg, Human Kalecgos). However, there are some drawbacks; frequency of updates are much slower, threat details cannot be obtained unless somebody in your party/raid are targetting the mob and it is also not possible to obtain threat from a mob you are not in direct combat with.

How do I get rid of the 2 vertical gray lines down the middle?

Lock your Omen. Locking Omen will prevent it from being moved or resized, as well as prevent the columns from being resized. If you haven't realized it, the 2 vertical gray lines are column resizing handles.

How do I make Omen3 look like Omen2?

Change both the Background Texture and Border Texture to Blizzard Tooltip, change the Background Color to black (by dragging the luminance bar to the bottom), and the Border Color to blue.

Why does no threat data show on a mob when I target it even though it is in combat?

The Blizzard threat API does not return threat data on any mob you are not in direct combat with. We suspect this is an effort on Blizzard's part to save network traffic.

Is there ANY way around this Blizzard limitation? Not being able to see my pet's threat before I attack has set me back to guessing.

There is no way around this limitation short of us doing the guessing for you (which is exactly how Omen2 did it).

The goal of Omen3 is to provide accurate threat data, we no longer intend to guess for you and in the process lower your FPS. Have some confidence in your pet/tank, or just wait 2 seconds before attacking and use a low damage spell such as Ice Lance so that you can get initial threat readings.

Can we get AoE mode back?

Again, this is not really possible without guessing threat values. Blizzard's threat API only allows us to query for threat data on units that somebody in the raid is targeting. This means that if there are 20 mobs and only 6 of them are targeted by the raid, there is no way to obtain accurate threat data on the other 14.

This is also extremely complicated to guess particularly for healing and buffing (threat gets divided by the number of mobs you are in combat with) because mobs that are under crowd control effects (sheep, banish, sap, etc) do not have their threat table modified and addons cannot reliably tell how many mobs you are in combat with. Omen2's guess was almost always wrong.

The tooltips on unit mouseover shows a threat % that does not match the threat % reported by Omen3. Why?

Blizzard's threat percentage is scaled to between 0% and 100%, so that you will always pull aggro at 100%. Omen reports the raw unscaled values which has pulling aggro percentages at 110% while in melee range and 130% otherwise.

By universal agreement, the primary target of a mob is called the tank and is defined to be at 100% threat.

The threat updates are slow...

Omen3 updates the threat values you see as often as Blizzard updates the threat values to us.

In fact, Blizzard updates them about once per second, which is much faster than what Omen2 used to sync updates. In Omen2, you only transmitted your threat to the rest of the raid once every 3 seconds (or 1.5s if you were a tank).

Where can I report bugs or give suggestions?

Who wrote Omen3?

Xinhuan (Blackrock/Barthilas US Alliance) did.

Do you accept Paypal donations?

Yes, send to xinhuan AT gmail DOT com.

Older Changes

Changes from version v3.1.5 to v3.1.6

  • Multiply the threat values reported by the WoW Servers in Dragon Soul instance by 10 because they are scaled by 10%. This fixes MI/Fade/Tricks oddities and reported TPS values.

Changes from version v3.1.4 to v3.1.5

  • Remove code that causes divide by 0 for future WoW updates/PTRs.
  • Show the "Hide Minimap Button" option if the button is ever registered with LDBIcon instead of trying to check whether FuBar or FuBar2Broker is loaded.

Changes from version v3.1.3 to v3.1.4

  • Omen will no longer create a second unremovable minimap button for the players that have other installed addons providing the LibFuBarPlugin-3.0 library but are not using FuBar.

Changes from version v3.1.2 to v3.1.3

  • Optimize CLEU codepath for 4.2 instead of 4.1 now that we are in 4.2. That is, the 4.2 forward compatibility code is now 4.1 backwards compatibility code.
  • Rearrange initialization code slightly.

Changes from version v3.1.1 to v3.1.2

  • Fixed issue where some players are unable to see any threat text on the bars until the current profile or TPS option is changed. The fix also fixes issues with some bar settings being "reverted to default" on login.
  • Fixed potential errors caused from combat log changes introduced in patch 4.2 PTR (untested on PTR servers).

Changes from version v3.1.0 to v3.1.1

  • Fixed errors caused from combat log changes introduced in patch 4.1.

Changes from version v3.0.11 to v3.1.0

  • Omen3 will now read the combat log and:
    • Track and estimate temporary threat created by Tricks and Misdirect
    • Track and estimate threat caused by damage while Fade, Mirror Image and glyphed Hand of Salvation are active
    • Display these *estimated* threat in a grey (default) color bar, with an expiry countdown (earliest one) next to the name.
  • When using class colored bars, the alpha transparency of the bars is now controlled by the "BG Bar Color" setting (which can only be modified if "Use Class Colors" is turned off).

Changes from version v3.0.10 to v3.0.11

Changes from version v3.0.9 to v3.0.10

  • Updated a few digits in the TOC to make people happy for Cataclysm.
  • Removed the outdated Warrior FAQ.

Changes from version v3.0.8 to v3.0.9

  • Add option to make Omen click-through (non-interactive).
  • Optimized the bar animation code significantly.
  • Fix bar backgrounds not being set to the inverted color on login if the "Invert Bar/Text Colors" setting is on. This wasn't noticeable if the bar label color was the default white text with 100% alpha.

Changes from version v3.0.7 to v3.0.8

  • Fix GetShapeShiftFormInfo() error that occurs for DKs when they aren't in any presence. This occurs when they respec between their primary/secondary specs and the game drops them out of all presences and subsequently enter combat presence-less.
  • Add ConfigMode support (see addon OneButtonConfig).
  • Omen will now update its bars immediately on showing from a hidden state instead of updating on the next threat event.
  • Includes updates to all localizations via http://www.wowace.com/projects/omen-threat-meter/localization/

Changes from version v3.0.6 to v3.0.7

  • Add optional !ClassColors support.
  • Add /omen show and /omen hide slash commands.
  • Add "Invert Bar/Text Colors" option (default off) which swaps the bar background and text colors.
  • Omen now generates the config tables on demand to make it use less memory.
  • Omen now provides better error feedback if AceGUI-3.0-SharedMediaWidgets is not found and will continue to function (but without any config).
  • Includes updates to all localizations via http://www.wowace.com/projects/omen-threat-meter/localization/

Changes from version v3.0.5 to v3.0.6

  • Update zhTW/zhCN/deDE localizations
  • Add Fade/MI Color to the options. This color is used on players under the effects of MI/Fade.
  • Add 410065408 threat to all players with negative threat for display purposes. English translation: You can now see the "un-Faded/un-MIed threat" of players under the effects of Fade and Mirror Image.

Changes from version v3.0.4 to v3.0.5

  • Implement an update event throttle, reducing CPU usage significantly without any loss of updates.
  • Clear the guidNameLookup table on zoning to recover some memory.
  • Fix Omen getting stuck to the mouse if autocollapse is on and you moved Omen while you are in combat and exited combat during the move.
  • Set a player's threat to 0 (for display purposes) if the player's threat is less than 0. This occurs on Fade and Mirror Image, which gives the caster a temporary threat reduction of 410057408 (or 4.1m threat in Omen's terms). Previously Omen ignored players with negative threat.
  • Omen will now remember its visible state when you log out (applicable only if auto-show/hide is off).

Changes from version v3.0.3 to v3.0.4

  • Update ruRU, koKR and zhTW localizations
  • Fix "Passed X% of Y's threat" message where it would report your name instead of the tank's name if you passed your tank's aggro AND pulled aggro at the same time.

Changes from version v3.0.2 to v3.0.3

  • Update various localizations. esMX will now see the same translations as esES
  • Add LSM callbacks so that the user can use custom media or media registered by other addons correctly
  • Allow the user to have different background settings for the Title Bar than from the main Omen window

Changes from version v3.0.1 to v3.0.2

  • Update various localizations
  • Fix error that occurs on changing Clamp To Screen option
  • Add option to change the Pet Color and changed the default Pet Color to violet
  • Omen will no longer create its internal minimap button if FuBar or Broker2FuBar are loaded
  • Fix bugs with "Hide Omen on 0 bars" option that caused Omen to keep appearing when unwanted

Changes from version v3.0.0 to v3.0.1

  • Fix error that occurs on changing profiles: Omen-3.0.0\Omen.lua:592: attempt to index global 'bar' (a nil value)

Changes from version RC3 to v3.0.0

  • Updated various localizations
  • Add Show threat values and % options
  • Add Aoogah! sound from Omen2
  • Fix Omen's alpha setting not applying on login
  • Add option not to use class colors
  • Fix bug which caused ghost bars to show when some classes are not selected to be shown
  • Add Tank Bar color option
  • Add "Always Show Self" option
  • Add Show/Hide Title Bar option
  • Add Use Focus Target and Test Mode checkboxes into the configuration panel
  • Add Show Aggro Bar option
  • Make Test Mode much more useful by showing bars of every possible class and the player
  • Fix minor issue where the TPS numbers are 1 pixel higher than the rest of the text on the threat bars
  • Hard embed LibDataBroker-1.1 and use it
  • Add LibDBIcon-1.0 external
  • Add minimap button option, default shown
  • Fix Omen's FuBar plugin issue for right clicks to open the configuration panel interfering with library upgrading paths
  • Rewrite Auto Show/Hide options to be more intuitive. Add option not to use Auto Show/Hide
  • Add an internal flag so that if the user manually toggles Omen's visibility, it stays shown/hidden until he next zones, join/leave a party/raid, or change any Auto Show/Hide settings
  • Add option to ignore player pets to display threat info on (Default: On). Yes, player pets have aggro tables too!
  • Add Frame Strata and Clamp To Screen options
  • Apply a whole list of configuration settings that were forgotten on changing profiles
  • Updated the FAQ

Changes from version RC2 to RC3

  • Renamed localization\deDE.lua to Localization\deDE.lua so that the auto-generated zip file will contain the folder "Localization" rather than "localization", which means Omen will now work on non-Windows operating systems

Changes from version RC1 to RC2

  • Add keybind to toggle using the focus target
  • Fix missing localization entry for "Passed %s%% of %s's threat!"
  • Add option to color your own threat bar to a color of your choice
  • Fix "VGrip1Ratio" error that occurs when completing a drag and Omen incorrectly attempts to hide itself.

tag v3.1.9
799b67d5beeaa94ceb3de60e9f2f1ba772a87059
Ethan Centaurai <ethancentaurai@outlook.com>
2014-10-17 10:35:15 +0100

Tagging as v3.1.9.

--------------------

Ethan Centaurai:
    - Bump toc and version number to pick up updated libraries.

Comments

First Previous Page 3 of 83 Next Last
  • #1911

    Just wanted to say 3.18 is running fine under 5.2 with no issues for me at all. Thanks for making such a great mod, Omen team :)

  • #1910

    So this addon is totaly borked and from what was said in the responce Insurrection267 posted it looks like its going to stay broken. Time to find a new threat meter it seems.

    "Never frighten a little man. He’ll kill you. " Lazarus Long

  • #1909
    5.2

    any updates to this for 5.2?

  • #1908

    OK, so I am glad (not really glad for those like me per say) I am not the only one experiencing crashes, freezes and overall inconstant gameplay with this version of omen. How do I know its omen, its because I re-downloaded WOW 3x thinking it wasn't omen, only come to find out it is.

    The first time was out of sheer frustration. Second time, I did error checking my C: drive, download all new "versions" of the addon's (xperl/omen/dmb/recount/atlas loot and that's all i ever use)...and boom...it crashed. Finally the 3rd time I put the game on another drive..NO ADDONS installed except xperl. Worked fine. I slowly put all my addon's on back in. Worked fine. Then I call myself going into LFR (ugh) and trying the stability there. It worked fine again. I get out of LFR and that's when I put omen back in, no more that 5min in...BOOM...it crashed, i took omen out, and its been smooth ever since. There is some error that's can't read wow correctly, it says it every time.

    So it would be very nice to have this corrected, are suggested workarounds, thanks

  • #1907

    If you want to run this without the "Load out of date addons" option, just go to the Omen.toc file, open it in a text editor and change:

    ## Interface: 50001

    to

    ## Interface: 50100 

    Save it and then log in to WoW again it will no longer show out of date.

  • #1906

    i have 5 not updated. it appears some combo is causing random crashing. thisis one not updated. could we get this one removed from the problem with an update?

  • #1905

    I sent a comment to one of the author's of this addon about it not being updated for 5.1

    This is one of the most popular addons and making sure load out of date addons is not checked is one of the ways to insure that your play experience is streamlined and as error free as possible.

    The response I got was this:

    "What needs to be updated? No part of the threat API has changed in years.
    Just check "Load out of date addons" at the addon screen, and nobody has to
    waste time, disk space, and bandwidth updating a single digit."

    There are over 15,000,000 downloads of this addon. Over 100,000 alone this month.
    It is one of the most popular addons used in the game at this time.

    Now I understand that addons are done with no compensation to the author(s) except
    for donations, however even in that circumstance this is still a unprofessional
    answer.

    Hundreds of addons, where updated within hours of the update and some of those are
    just as complex as this one if not more complex. The author's of those addons receive
    no compensation except for donations either.

    This answer that you provided is disapointing not just to me but to several people
    I know in game who are anxiously waiting for it to be updated as well some of those
    others that have left comments in these forums and I am sure countless others that
    have not openly commented on this issue.
  • #1903

    Whatever happy patch Blizz implemented yesterday broke omen for me. Can get fixed pls?

     

    Thanks!

  • #1904

    me as well, love using this addon its great when your doing guild runs or pug runs and your high dps, so you dont rip agro off the tanks XD please fix asap.

     

    "Changes from version v3.1.6 to v3.1.7
    • Add option to choose what sound channel to play warnings on, default is SFX (thanks tharai).
    • Add fixes for MoP patch 5.0.4 (thanks dridzt).
    • Removed compatibility code for older versions of WoW. This version now only runs in MoP."

    perhaps put the compatability code back? and why take it out?

  • #1902

    Could this be made to hide during pet battles? I'm not seeing any options and threat is obviously not a feature during them.

     

  • #1901

    is there any update coming out for 5.1.0, just wondering, i have disabled all my addons's due to crashs, freezes, ect.. this new patch has been out a week already, i like this addon, along with quartz, these really are the only addon's i really use

  • #1900

    How do you change the font of the bars? I swear I'm not blind but I can't seem to figure this out

  • #1899

    Is there a way to get Omen to keep the threat data up instead of clearing after each battle?

  • #1895

    Hi,

    Is there a way to invert the growth direction of the bars? From right to left instead of left to right?

    Thanks!

  • #1890
    hiding on minimap

    Possible that I'm just missing it, but I've gone through the options and can't find where to hide the icon off my minimap. Any pointers?

     

  • To post a comment, please login or register a new account.
Login to Curse

Don't have an account? Create One.

Get an epic experience with Curse Premium
  • Faster addon downloads
  • Premium-Only Beta Giveaways
  • Ad-Free Curse experience
  • Premium Curse Client
  • and many More Features
  • Learn More »

Dying Light Wiki Game Giveaway